CD20R Technical Specifications

Key features

• Remote control
• Low-noise master clock
• 75 Ω SPDIF digital output
• Digitally-controlled muting
• 'Straight Line Technology'
• Gold-plated phono connectors
• Dual low-impedance stereo outputs
• Proprietary Sorbothane® sonic isolation feet
• High-stability transport mechanism with digital servo control, visco-elastic silicone rubber suspension, three beam laser and linear motor
• Microprocessor - prevents damage and reduces the number of key presses
• Sophisticated programming allows up to 59 tracks to be played in any order, including repetitions

cd mechanism	CDM 12.4
cd loader	L 1265/51
audio output connector	phono socket
audio output impedance	100 W nominal
audio output level (full scale output)	2.15 V ± 0.5 dB
digital output format	Coaxial SPDIF
digital output connector	phono socket
digital ouput impedance	75 W ± 10%
digital output level (into rated load)	500 mV pp ± 10%
digital filter resolution	20 bit
passband ripple	± 0.001 dB
stop band attenuation	greater than 75 dB
group delay	567 mS
digital to analogue converter	128 times digital interpolator, fourth-order delta-sigma modulator, single bit DAC
signal to noise ratio	greater than 100 dB (A-weighted)
frequency response (+ 0.2 / - 0.8 dB)	2 Hz - 20 kHz
total harmonic distortion (0 dB full scale)	less than 0.003% at 1 kHz
channel balance (0 dB full scale)	± 0.5 dB at 1 kHz
channel separation (0 dB full scale)	greater than 100 dB at 1 kHz
operating temperature range	10 - 35oC
ac supply frequency	50 - 60 Hz
ac supply voltage	110 - 120 V or 220 - 240 V The voltage is marked on the rear of the unit
power consumption	less than 25 W
dimensions (including feet, terminals and controls)	445 mm wide 75 mm high 314 mm deep (excluding loading tray)
We reserve the right to alter design and specification without notice Specification may vary for different countries

The TagMclaren sign is a registered trademark of Mclaren Group Limited. Copyright 2004 Pointfield Limited - a member of the International Audio Group.